|
|
|
|
|
|
|
|
|
|
|
WACKER® AK 1000 SILICONE FUID
|
|
| Model No.︰ | AK1000 |
| Brand Name︰ | WACKER |
| Country of Origin︰ | Germany |
| Minimum Order︰ | 1 KG |
|
|
|
|
|
|
|
Product description - antifoam agent
- water-repellent agent
Structural formula: - liquid dielectric for electrical and electronic
equipment
- heat-transfer oil
- polish additive
- plastics additive
- additive for textile and fiber auxiliaries
For pharmaceutical applications, we recommend specialty silicone fluids from our SILFAR® line. Silicone fluids from our BELSIL® line are available for
the cosmetic sector. Whenever particularly high heat
and shear resistance is required, we recommend
silicone fluids from our AK stab, AK visc and AKC
product lines. Specialty grades of the product (available as WACKER® PLASTICIZER) will be
needed for use as a silicone plasticizer in RTV-1
WACKER® AK 1 000 is a linear, non-reactive sealants.
polydimethylsiloxane with a viscosity of
approx. 1 000 mm²/s. Due to its chemical structure, Processing
WACKER® AK 1 000 has an outstanding property profile, which sets it apart from organic materials such Due to WACKER® SILICONE FLUID's many diverse
as mineral oils. applications, no general processing information can be
provided. Parameters will vary from application to
Properties application.
WACKER® AK 1 000 is a clear, odorless and colorless liquid. Available in a range of viscosities, WACKER® SILICONE FLUIDS AK are miscible with
each other in any ratio. The standard product's
Special features viscosity can thus be altered to suit your individual
needs.
- minimal change in physical properties over a broad WACKER® AK 1 000 is a non-polar liquid and is
temperature range immiscible with polar solvents such as water or short-
- excellent water-repellent properties chain alcohols. In aliphatic and aromatic
- good dielectric properties hydrocarbons, chlorohydrocarbons, ethers, esters,
- low surface tension and thus high surface activity ketones and higher alcohols, WACKER® AK 1 000 is
- chemically highly unreactive soluble in any proportion.
- low solidifying point Before the product is used with solvents for the first
- high flash point time, it is advisable to perform a lab-scale test.
- high heat resistance When solvents are used, please remember to read the
- good solubility in a wide range of solvents appropriate hazard information.
Application Storage
- release agent Maximum temperature allowed during storage and
- lubricant transportation:
- hydraulic fluid 50 °C
|
|
|
|
| Payment Terms︰ | TT/DP |
| Packing︰ | 200KG/Drum |
| Product Data︰ | WACKER® AK 1000 SILICONE FLUID is a linear, non-reactive polydimethylsiloxane with a
viscosity of approx. 1 000 mm²/s. Due to its chemical structure, WACKER® AK 1000 SILICONE FLUID has an
outstanding property profile, which sets it apart from organic materials such as mineral oils.
Auto ignition temperature DIN 51794 450 °C
Density at 25 °C DIN 51757 0.97 g/cm³
Flash point ISO 2592 > 300 °C
Flash point ASTM D92 314 °C
Surface tension at 25 °C 0.021 N/m
Viscosity, dynamic at 25 °C 1000 mPa.s
Viscosity, kinematic at 25 °C DIN 53018
1000 mm²/s
|
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
